American Audio DIGI-PRO Guide de l'utilisateur télécharger pdf (Page 92)

Eleven Rack User Guide86

Re-Amping

(Eleven Rack as Pro Tools Interface Only)

This section describes the Re-Amping process

when using Eleven Rack as your Pro Tools audio

interface.

Re-Amping is the process of sending pre-re-

corded audio (in this case, from within

Pro Tools,) to an external guitar amplifier or ef-

fects unit, and then re-recording the processed

audio to a new track.

This is sometimes done when a guitar track is re-

corded dry and the amp and effects sound is to

be decided upon later (see “Guitar Recording

with Pro Tools” on page 81).

In the case of Eleven Rack, re-amping can be

done one of two ways.

• Tracks can be sent from Pro Tools into the on-

board guitar processor in Eleven Rack, and re-

recorded to a new track.

– or –

• Tracks can be sent from Pro Tools, out

through the Output To Amp outputs on

Eleven Rack, into one or more external guitar

amps or processors, and then re-recorded

through the microphone, line, or guitar in-

puts on Eleven Rack, depending on the type

of external devices being used.

To re-amp a signal using the guitar processor in

Eleven Rack:

1 Choose the track in Pro Tools to be re-amped.

2 Assign the output of the track to one of the

following:

• Interface > ReAmp L/R (if signal is stereo)

• Interface > ReAmp L or ReAmp R (if signal is

mono)

3 Set the Rig Input on Eleven Rack to Re-Amp,

using the Rig Input setting in User Options, or

the Eleven Rack Control Window in Pro Tools.

4 Create a new audio track, and assign its input

to Interface > Eleven Rig.

5 In Pro Tools Edit window, click with the Selec-

tor tool at the beginning of the first audio region

on the track to be re-amped.

6 Select a Rig in the Eleven Rack Control win-

dow, and adjust the settings as desired.

7 Start recording in Pro Tools.

8 The audio from the chosen track will be pro-

cessed through Eleven Rack, and re-recorded to

the new stereo Audio track.

To re-amp a signal using the Output To Amp

outputs on Eleven Rack:

1 Choose the track in Pro Tools to be re-amped.

2 In the Eleven Rack Control window, choose

what point in the signal chain will be fed to one

or both of the To Amp outputs using the To Amp

Output selectors.

3 Create a new audio track, and assign its input

to match the device you are using to re-amp, as

follows:

• If re-amping through a guitar amp and mi-

crophone, or a device with an XLR DI out-

put, select Interface > Mic In.

By default, the re-amped signal is muted

when you press Play on the transport, but

are not recording. If you want to hear the re-

amped signal while in playback, turn on In-

put Only Monitoring mode by clicking

Track > Input Only Monitoring. For more

information on Input Only Monitoring

mode, see the Pro Tools Reference Guide.

See “Output to Amp Selectors” on page 78

for details.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 141 142

Commentaires sur ces manuels

Pas de commentaire